Table of Contents
Advertisement
Using the Signal Processing Products Control Program (SPPCP)
The Windows-based Extron Signal Processing Products Control Program (SPPCP) offers an
alternative way to control the DVS 510 Series via an RS-232, RS-422, or Ethernet connection.
The graphical user interface includes the same functions as those on the scaler front panel
with additional features that are available only through the software.
The control software is compatible with Windows 98, Windows NT, Windows 2000,
Windows XP, and Windows 7. The Signal Processing Products Control Program is on the
included Extron Software DVD, and updates can be downloaded from the Extron website
(http://www.extron.com).
NOTE:
Installing the Software
The SPPCP software can be installed onto the hard drive of a connected PC either directly
from the supplied DVD, or downloaded from the Extron website.
Installing from the Extron DVD
If you have an Extron disc containing the SPPCP program, install the software on your
computer as follows:
1.
2.
3.
The control program requires approximately 32 MB of hard disk space.
Insert the DVD into the applicable drive. If the disc does not start automatically, open
your Windows Explorer and double-click
NOTE:
The DVD starts only if your PC has a DVD (not a CD) drive.
On the Extron software DVD opening screen, click the
Figure 30.
Software Button on the DVD Opening Screen
On the Control Software screen, locate the
and click the
Program
Install
Figure 31.
SPPCP Install Link on the Software DVD Screen
Launch.exe
on the DVD drive to start it.
Software
Signal Processing Products Control
link in the far right column.
DVS 510 Series • Remote Configuration and Control
button.
78
Advertisement
Table of Contents
