Tlp 700Tv Base Features - Extron electronics TLP 700MV User Manual

TLP 700TV Base Features

Figure 8.
The TLP 700TV stand, which can be removed for VESA mounting, has:
q
r
s
TLP 700TV Base Features
Three adjustable potentiometers — These are used to control sharpness and gain
for both S-video luminance (Y) and S-video chrominance (C). If a composite video
signal is being used, the gain is controlled by the center potentiometer (Vid/Y).
Figure 9. TLP 700TV Potentiometers
Access for disconnecting RJ-45 connectors — When RJ-45 connectors are covered
with a protective boot, it can be difficult to remove them from their sockets. The two
holes are directly underneath the two RJ-45 jacks
pen or pencil through the holes makes it easy to disconnect the RJ-45 connectors.
Security mounting — If required,
screws, as described on page 41.
19
17
18
(see figure 7). Pushing the tip of a
secure the unit to the desktop, using two
TLP 700MV and TLP 700TV • Panel Features 10