Basic Setting; Change Password - EverFocus EFC304 User Manual

NAV IP Access controller
Chapter
8
8. Basic Setting
This chapter will introduce basic setting of EverAccess® NAV Controller. It is including change password,
user groups setting, user setting, local server configuration, system upgrade and center server
configuration.
Change Password: revise login password.
User Groups setting: add, delete and modify the software and permission groups. No limit on their
number, the user can add permissions groups as needed.
User setting: add, delete and modify the users operate the software. The default administrator is admin.
It has all operating privileges, only modify the password of super administrator.
Local sever configuration：Configure IP type, address, gateway, date, time and so on.
System Update: upgrade online and upgrade local.
Center server configuration: center server configuration refers to the "ENS2000 NAV series WEB
Network Access Control Management software" (not the built‐in software) address and password
configuration etc. The configured controller can be used as a sub‐station to be connected and managed
to the ENS2000 software.
8.1 Change Password
Here Password is for the current user logging to NAV Controller built‐in browser software, it just only
modify its login password.
First of all, the user must input the old password, then enter and repeat the new password. Click the
"Save" button to save. If the input is wrong, user can use the "Reset" button to refill.
Figure 8‐1Change Password
77