NAV IP Access controller
Press
and the system will prompt the user to enter a card serial number, as shown below:
After entering the serial number, press
confirm again like the below screen:
Press
to confirm or press
5.6.4.6
Delete All Cards
All cards can be deleted at once. At the following window:
Press
and system will prompt the user to confirm deletion:
Press
again to delete all cards.
Caution
: this operation will permanently delete ALL cards from the controller database. This
operation is NOT undoable.
5.6.4 Set Card Properties
Under the Card Setting menu, press
Press
and system will prompt the user to enter serial number, as shown below:
After entering the serial number, press
card has 6 properties that can be modified. Use
5.6.4.7
Status Setting
A card can be set as enabled or disabled at the following submenu:
Input Card Serial
card#:___________
to delete this card. The system will prompt users to
Are you sure to
Delete000005398787
to exit from the "delete card" menu.
Delete All Cards
Are You Sure ?
[ENT] to Confirm
twice to bring up the following window:
Set Card
Properties
Input Card Serial
card#:___________
to enter to the submenu for setting card properties. Each
and
Status Setting
37
to choose desired properties.