Alarm Setting Menu Structure; Alarm Input Setting - EverFocus EFC304 User Manual

NAV IP Access controller
Press to enter Alarm Setting menu. Use
All menu options under Alarm Setting are introduced below:
5.9.4 Alarm Setting Menu Structure
There are two submenus under Alarm Setting, as shown below:
Alarm Setting
Alarm Input Setting
Event Alarm Setting
Alarm input setting menu is used to configure the settings of the physical alarm inputs on main module
and alarm module, including input mode, output mode, fire alarm input, alarm output actions, door
behavior under fire alarm, arm delay time, and alarm output duration.
Event alarm setting menu is used to configure alarm outputs and output duration for all events on main
module and door module.
5.9.5 Alarm Input Setting
From the Alarm Setting menu, go to the below window:
Alarm Setting
and
Select an alarm input
Alarm Input Mode Setting
Alarm Output Mode Setting
Fire Alarm Setting
Alarm Action Setting
Door Action Setting on Fire
ArmDelay Time Setting
Alarm out Time Setting
EventAlarm Time Setting
SYS PIN Fail, ARM PIN Fail, ...
EventAlarm Action Setting
SYS PIN Fail, ARM PIN Fail, ...
Alarm Input
Setting
47
to choose from different menu options.
Alarm Act Setting on Main Module
Alarm Act Setting on Door Module
Alarm Act Setting on Extern Module