Table of Contents
Advertisement
7.1.3 A Varietyof WaystoAdd Cards
Software provides a variety ways to add the card to the system. Users can choose any way to achieve
this functionality. The follow describes how to add a separate card and the allocation of the
corresponding control groups.
Access group's default is "Full Granted"; default password is "000000". First select the card format users
want to add.
7.1.3.1Quick add card
When the user has logged in software, swipes card on the controller, then swiped card recording shown
in the system event log, this time can through copying. (Detail sees 7.3.5.1).
Steps：
1) Add new card through the reader.
2) Log in software, in the system event records (Records of Normal card access and
illegal card access); it will show card number, copy the card number.
3) Select the correct card format.
4) Go to "Cardholder" page to add a new card. Click "Save".
7.1.3.2 Card Setting Interface
Click on the menu bar "Access Control" "Card" "Card Setting", enter to cards
setting. Below is how to add a card and the allocation of access groups. (Detail sees 14.2.1).
Steps：
1) In "Card Type Setting" page, select the card format.
2) Click the "Add" button and enter to the Card Setting Page.
3) Fill out all properties of card.
4) If a cardholder name has been added, the card can be assigned to the cardholder.
5) Select an access group for the card.
6) Select card private schedule. When the card applies the private schedule, it will
follow private schedule to verify enter and exit.
7) Click the "save" button and setting completed.
7.1.3.3 Import Cards Using Excel File
In Excel, edit the card data (no quantitative restrictions), save as CSV file to import the card through
software features to complete the registration card to the controller (whether registered to the
controller of this card depends on the access group setting, if there is no choice access group options,
they are given the default access group "Full Granted").
Click on the menu bar "Access Control" "Card""Import Card"
Steps：
1) Click the "Browse" button, select the Excel file to be imported, click the "Next".
66
NAV IP Access controller
Advertisement
Table of Contents
