Text Box Position; What Can Be Done; How To Change The Setting; Quick Access Keys - Barco R9001950 Owner's Manual

Installation Mode

Text Box Position

What can be done ?

The text box position can be changed from bottom right to automatic, dependig the aspect ratio the projector chooses a position, to
center, always in the center of the image.

How to change the setting ?

Push the cursor key é or ê to highlight 'Text Box Position' (menu 1).
1
2 Press ENTER to select.
The Text Box menu will be displayed (menu 2).
3 Align will be selected. Press ENTER to toggle between [Bottom Right], [Automatic] or [Center].
[Bottom Right] : text box will always be displayed in the bottom rigth corner.
[Automatic] : the text box position depends on the aspect ratio.
[Center] : the text box position will always be in the middle of the image.
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
TEXT BOX POSITION

QUICK ACCESS KEYS

START UP MODE
NETWORK CONFIGURATION
more ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Quick Access Keys
What can be done ?
The function keys on top of the RCU can be associated with an adjustment item in one of the adjustment menus.
Each item which is not password protected or does not have a key on the RCU can associated to a function key.

Getting an overview

The menu Quick Access keys gives an overview of the actual programmed functions.
To get an overview, handle as follow :
Push the cursor key é or ê to highlight 'Quick Access Keys' (menu 1).
1
2 Press ENTER to select.
The Quick Access Keys menu will be displayed (menu 2).
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
TEXT BOX POSITION
QUICK ACCESS KEYS
START UP MODE
NETWORK CONFIGURATION
more ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Factory preprogrammed keys

F1 : color depth
F2 : noise reduction
F3 : configuration
F4 : lens adjust zoom/focus
F5 : lens adjust shift

How to program the quick access keys (function keys) :

1 Scroll through the menus until the desired menu is active
2 Push the desired function key for 3 seconds.
The message 'Quick access to this menu with Fx', where x is the digit of the selected function key.
If the selected menu is not a valid menu for the quick access keys the next message will be displayed : "Quick access to this menu
impossible".
9-4
TEXT BOX POSITION
ALIGN : [CENTER]
Select with or
then <ENTER>
<EXIT> to return.
menu 2
QUICK ACCESS KEYS
F1 : DYNAMIC COLOR DEPTH
F2 : NOISE REDUCTION
F3 : CONFIGURATION
F4 : LENS ADJUST ZOOM/FOCUS
F5 : LENS ADJUST SHIFT
Note :
'?' : auto image adjust
'*' : lens adjustments
menu 2
5976183 BARCOGRAPHICS 6500 31012001