Table of Contents
Advertisement
Changing the Shutdown Time
The shutdown time can be set between 5 min and 60 min.
To set up the shutdown time, handle as follow :
Push the cursor key é or ê to highlight 'No signal' (menu 1).
1
2
Press ENTER to select.
Push the cursor key é or ê to highlight 'Shutdown time' (menu 2).
3
Push the cursor key é or ê to change the digits or
4
Enter the digits directly with the digits keys on the RCU.
Lens Adjustments
What can be done ?
All lens adjustments are motorized and can be adjusted with the RCU.
The following items can be adjusted:
- Zoom/Focus
- Shift
To adjust all lens functions such as zoom, focus and shift, handle as follow :
Push the cursor key é or ê to highlight 'Lens' (menu 1).
1
2
Press ENTER to select.
The Adjustment pattern will be displayed.
With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source.
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
TEXT BOX POSITION
QUICK ACCESS KEYS
START UP MODE
NETWORK CONFIGURATION
more ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Zoom/Focus/Shift
The Zoom/Focus function is only applied when a motorised zoom lens is mounted.
To focus or zoom the image :
Push the cursor key é or ê to zoom and ç or è to focus the image (menu 1).
1
2
When finished, press EXIT to return to the installation menu or press ENTER to go to the shift function.
To shift the image :
1
Press ENTER to switch to the shift menu
Push the cursor key é or ê to shift the image up or down and ç or è to shift the image left or right (menu 2).
2
3
When finished, press EXIT to return to the shift menu or press ENTER to go to the zoom/focus function.
The lens can be shifted in a range of :
- vertical direction : - 2 mm to + 20 mm
- horizontal direction : - 5 mm to + 5 mm
Zoom/Focus
Change with é,ê,ç,è
<ENTER> to Shift
<EXIT> to return
menu 1
5976183 BARCOGRAPHICS 6500 31012001
Shift
Change with é,ê,ç,è
<ENTER> to Zoom/Focus
<EXIT> to return
menu 2
Installation Mode
9-3
Advertisement
Table of Contents
