Start Up Mode; What Can Be Done; Start Up Identification; Start Up Auto Power Mode - Barco R9001950 Owner's Manual

Start Up mode

What can be done ?

1 During start up, the projector can show first the identification screen or a blank screen.
2 The projector can start up with auto power. The projector starts up in the same power condition as it was before power supply
was interrupted.

Start up Identification

Push the cursor key é or ê to highlight 'Start Up Mode' (menu 1).
1
2 Press ENTER to display the start up mode menu (menu 2).
Push the cursor key é or ê to highlight 'Identification' (menu 2).
3
4 Press ENTER to toggle between [ON] or [OFF].
Identification [ON] : projector identification will be displayed during start up.
Identification [OFF] : a blank screen will be displayed during start up.
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
TEXT BOX POSITION
QUICK ACCESS KEYS
START UP MODE
NETWORK CONFIGURATION
more ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Start up Auto Power mode

Push the cursor key é or ê to highlight 'Start Up Mode' (menu 1).
1
2 Press ENTER to display the start up mode menu (menu 2).
Push the cursor key é or ê to highlight 'Auto Power' (menu 2).
3
4 Press ENTER to toggle between [ON] or [OFF].
Auto power [ON] : projector power starts up as it was switched off before. When the projector was in stand by before it was switched
off, it starts up in stand by. When it was switched off with full power, it starts up with full power.
Autopower [OFF] : projector always starts up in stand by mode.
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
TEXT BOX POSITION
QUICK ACCESS KEYS
START UP MODE
NETWORK CONFIGURATION
more ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5976183 BARCOGRAPHICS 6500 31012001
START UP MODE
IDENTIFICATION : [ON]
AUTO POWER : [ON]
Select with or
then <ENTER>
<EXIT> to return.
menu 2
START UP MODE
IDENTIFICATION : [ON]
AUTO POWER : [ON]
Select with or
then <ENTER>
<EXIT> to return.
menu 2
Installation Mode
9-5