Change Password; How To Enable Or Disable The Password Function; How To Change The Password; Change Language - Barco R9001950 Owner's Manual

Change Password

How to enable or disable the password function ?

This item is password protected when the password strap is installed.
The password function is enabled when the password strap on the controller module is installed. Consult an authorised Barco service
technician to change the strap position.

How to change the password ?

1 Push the cursor key é or ê to highlight 'Change password' (menu 1).
2 Press ENTER to display the Change Password menu (menu 2).
4 '_' characters are displayed. A new pasword can be entered with the digit keys of the RCU or local keypad. Everytime a digit
is entered, a 'X' appears on the screen. The confirm new pasword is still grayed out.
3 Press ENTER, the confirm new password item becomes active.
Press EXIT if no changes have to be made.
4 4 'x' characters are displayed in the confirm new pasword area. Key in your password again with the digit keys of the RCU
or the local keypad.
5 Press ENTER.
If the confirm new password entery is the same as the entered new password, the password is changed.
SERVICE
IDENTIFICATION
CHANGE PASSWORD

CHANGE LANGUAGE

CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Change Language

Start Up

1 Push the cursor key é or ê to highlight 'Change Language' (menu 1).
2 Press ENTER to display the Change Language menu (menu 2).
3 Push the cursor key é or ê to highlight the desired language.
4 Press ENTER to change the language.
Available languages : English
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DIMMING
MORE ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5976183 BARCOGRAPHICS 6500 31012001
CHANGE PASSWORD
Enter new password
xxxx
Confirm new password
xxxx
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
CHANGE LANGUAGE
English
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
Service Mode
9-3