Table of Contents
Advertisement
6
START UP OF THE ADJUSTMENT MODE
Adjustment Mode
Start Up
All source parameters, picture and audio tuning, and geometry are made while in the 'Adjustment Mode'. Press the ADJUST or ENTER
key to enter the 'Adjustment mode'.
You are now in the 'Adjustment Mode'.
1
The cursor key (RCU) or '+ or '-' keys (local keypad) are used to make menu selections and also for adjustments.
2
The ENTER and EXIT keys are used to move forward and backward through the menu structure.
3
The ADJUST key can be used to terminate the adjustment mode while any path selection menu is displayed.
ADJUSTMENT MODE
Select a path from below :
AUTO IMAGE
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Possible Paths
There are 4 possible paths to follow once in the Adjustment Mode. They are :
Auto Image - Auto image will center the image on the LCD panel when a file is loaded.
Installation - Installation should be selected if a new input module is installed or a new source is connected to an existing input module.
Also when the projector is relocated in a new configuration.
Random Access - Random Access should be selected to set up a new source.
Service - Service should be selected if the user intends to change general settings such as password, language, address, etc.or
some service actions as reset lamp run time, panel adjustments, etc. or get set-up information.
Password Protection
Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password
(Password protection is only available when the password strap on the controller module is ON, call an authorised service center
to change the position of the password strap).
PASSWORD
ENTER PASSWORD
----
Use numeric keys
<EXIT> to return
Entering the Password
The password contains 4 digits.
Enter the digits with the numeric keys.
Example : 2 3 1 9
The first digit position is highlighted. Enter with the numeric keys. The highlighted square jumps to the next position. Continue until
all 4 digits are filled in.
5976183 BARCOGRAPHICS 6500 31012001
Start up of the Adjustment Mode
6-1
Advertisement
Table of Contents
