Setting The Password - Toa C-CC704 CU Setup Manual

4. 10. Setting the Password

Set the password required when activating the Camera menu screen.
ON: Displays the Password entry screen when entering the menu screen.
Password can be set.
OFF: Allows to enter the maintenance screen without password verification.
Password cannot be set.
1. Tilt the joystick up or down to select "SYSTEM LOCK" on the
dome setting screen.
2. Select "ON" by tilting the joystick left or right.
3. Tilt the joystick up or down to select "PASSWORD," then tilt the
joystick right.
Password setting screen is displayed.
Note: It is not possible to enter "PASSWORD" without selecting
"ON" for the system lock in Step 2.
4. Enter 3-digit password in the "PASSWORD" field.
Press the Set key each time when a digit is entered.
5. Enter the same password again in the "CONFIRM" filed.
When the setting has been performed correctly, "OK!" is
displayed.
Note
When the password has not been entered correctly, "FAIL!" is
displayed.
It means that password has not been set. In such cases, enter the
password again.
D O M E S E T
S Y S T E M L O C K S Y S T E M L O C K : O N
[ P A S S W O R D ]
[ O S D D I S P L A Y ]
[ S Y S T E M S T A T U S ]
[ C L E A R ]
[ P R E V I O U S P A G E ]
D O M E S E T
S Y S T E M L O C K : O N
[ P A S S W O R D ] [ P A S S W O R D ]
[ O S D D I S P L A Y ]
[ S Y S T E M S T A T U S ]
[ C L E A R ]
[ P R E V I O U S P A G E ]
E N T E R P A S S W O R D
B Y E N T E R I N G P R E S E T C O D E !
P A S S W O R D
C O N F I R M
15