Unpacking - Bosch APC-AMC2-4W Installation Manual

12 en | Safety Instructions
CAUTION!
!
Disconnect both AC and battery power supply before working
on the controller.
Warning! Risk of damage!
!
Protect the hardware from electrostatic discharge by observing
ESD instructions before unpacking or touching connectors or
electronics.
CAUTION: Lithium Battery
Danger of explosion if battery is replaced incorrectly. Replace
!
only with the same type as recommended by the manufacturer.
Dispose used batteries according to the battery manufacturer's
instructions.
2.4

Unpacking

Check the packaging for visual damage. If anything has been
damaged during transport, make the transport agency aware of
this.
Carefully unpack the unit. This is an electronic device that must
be handled with care to avoid damage. Do not attempt to put
the unit into operation if components are damaged.
If parts are missing, inform your customer service representa-
tive or a Bosch Security Systems salesperson. The shipping car-
ton is the safest transport container for the unit. Store it and
the other packaging material for future use. If the unit has to be
sent back, use the original packaging.
F.01U.024.965 | V.4 | 2006.09 Installation manual
AMC2 4W
Bosch Security Systems