Bosch APC-AMC2-4W Installation Manual page 40

40 en | Installing
interface is connected via a 10-pin pluggable screw connector
(S2, S7, S14, and S19).
Fig. 5.17 Location of the Wiegand interfaces for external devices
The interfaces are point-to-point connections. You can connect
only one reader to an interface - the cable length is limited to
150 m (492 ft). Like the numbering of the interfaces the reader
get their address.
NOTE!
i
A complete connection diagram of the Wiegand interface is
shown in Figure 7.7.
F.01U.024.965 | V.4 | 2006.09 Installation manual
AMC2 4W
Bosch Security Systems