Introduction; Description Of The Amc2 4W - Bosch APC-AMC2-4W Installation Manual

AMC2 4W
3

Introduction

3.1

Description of the AMC2 4W

The AMC2 4W is equipped with four independent interfaces for
Wiegand type readers. By that it is able to control two doors
with a reader in each direction and up to four doors with a
reader in one direction only.
Fig. 3.1 The Access Modular Controller AMC2 4W
All necessary information for access verification is stored in a
battery buffered on-board memory and a Compact Flash (CF)
memory card. This guarantees autonomous access decisions
and complete access registrations even if the management host
system is offline. The built in compact flash adapter provides
adequate storage capability for cardholders and events.
The AMC2 4W electronic is completely covered by a plastic
housing. The LC Display provides all important status informa-
tion.
Using the AMC2 4W gives you the full functionality and the
offline capability of a complete access control system on each
room. This leads to an excellent reliability and a very high
redundancy without paying extra money.
Bosch Security Systems Installation manual
Introduction | en 13
F.01U.024.965 | V.4 | 2006.09