Table 2-2 Rear Panel Connections - Motorola DCT6400 Series Installation Manual

Table 2-2
Rear panel connections
Key Item
1
CABLE
IN
ETHERNET
*
2
R AUDIO IN L
*
3
SPDIF
4
VIDEO
5
IN OUT
6
IR
7
*
8
DVI-D OUT
9
10
AUDIO OUT
11
Pr
Y Pb
12
S-VIDEO
13
14
OPTICAL
SPDIF
IEEE 1394
15
* These connectors are not enabled and require the support of the application software.
Function
F-type connector used for the coaxial cable input from service provider (input to
integrated RF return).
Ethernet 10Base-T port supports PC networking.
RCA jacks for loop-through audio from audio equipment.
Digital output that carries Dolby Digital 5.1 audio or PCM audio.
– RCA jack connects the DCT6400 to a composite (baseband) video input
VIDEO IN
from a TV, VCR, camcorder, or other video device. Not enabled at this time.
– RCA jack to deliver video to a device such as a VCR or TV. Enabled.
VIDEO OUT
AC power outlet that can be configured as a switched or unswitched outlet; and a
two-pronged plug for attaching a power cord.
Mini phono jack enabling the DCT6400 to control a VCR using an optional low
power IR Blaster transmitter (not all electronic program guides support this feature).
USB connector for devices such as keyboards, joysticks, scanners, disk storage,
PCs, printers, or digital cameras.
Digital Video Interface (DVI) connector to an HDTV.
Left and right audio RCA jacks for stereo audio output.
RCA connectors to an HDTV.
TV passcard interface.
Coaxial cable connector used to deliver high quality video to external devices that
accept S-Video inputs, such as a high-end VCR or TV.
Optical digital output that carries Dolby Digital 5.1 audio or PCM audio.
IEEE 1394 connector for connecting to audio and video devices such as a DTV.
Overview
DCT6400 Series Installation Manual
2-3