Using The Diagnostics; Figure 4-1 Example Of The Led For The Main Menu - Motorola DCT6400 Series Installation Manual

4-2 Diagnostics

Using the Diagnostics

To use the diagnostics:
1
Ensure that the set-top is installed with the base platform or Thin Client software and that
it is connected to an AC outlet.
2
Press and immediately press
POWER
main menu is displayed on the OSD and "d01" is displayed on the front-panel LED:
> d01
d02
d03
d04
d05
d06
d07
d08
d09
d10
d11
d12
d13
d14
E
Figure 4-1
Example of the LED for the main menu
You can use the following keys to navigate the diagnostics menus:
▲,
Press
CHANNEL CHANNEL
◄,
Press
CURSOR CURSOR
Select E from the main menu or press
DCT6400 Series Installation Manual
SELECT
DIAGNOSTICS
GENERAL STATUS
PURCHASE STATUS
OOB STATUS
INBAND STATUS
UNIT ADDRESS
CURRENT CHANNEL STATUS
UPSTREAM MODEM
CODE MODULES
MEMORY CONFIG
KEYPAD/LED
INTERFACE STATUS
USER SETTING STATUS
PVR/HDD STATUS
INTERACTIVE (displayed only when Thin Client is running)
EXIT
MUTE
▼, ▲, or
CURSOR
►,
or
SELECT ENTER
POWER
to enable diagnostic mode. The Diagnostics
P
MUTE
▼ to select d01 through E.
CURSOR
to execute the selected diagnostic.
to exit.