Motorola DCT6400 Series Installation Manual page 45

4-14 Diagnostics
The Code Modules fields are:
Field
Bootloader
Firmware
Digital Secure Processor
Analog Secure Processor
Downloadable Object
Information Table
Object / Ver
Status
Segs/Time
DCT6400 Series Installation Manual
Description
Indicates the boot loader version and major and minor revision numbers in ASCII
format.
Indicates the firmware version in ASCII format.
Indicates the digital secure processor version in ASCII format.
Indicates the analog secure processor version in ASCII format.
The information displayed for each object depends on the running environment.
Indicates the name and versions of all objects loaded, or being loaded, onto the
set-top, in ASCII format. If a download is not in progress, the LED displays the
current environment running and version number as shown in Figure 4-9. On the
LED, "bPC" represents base platform or Thin Client code.
Indicates the object status displayed on the OSD and LED. It is updated every
5 seconds while you display the diagnostic.
OSD Status
MEM ALLOC Allocated
LOADING Loading
STARTING Enabling
ENABLED Enabled
ENA–NOT RUN Enabled_Not_
Runnable
STOPPING Disabling
DISABLED Disabled
DIS-NOT RUN Disabled_Not_
Runnable
DELETING Deleting
POSTPONED Postponed
CONNECTED Connect
PEND CONNECT TryingToConnect
Indicates the segments remaining in the download or the total time of the
completed download in GPS seconds, displayed on the OSD and LED.
Description
Memory for object is allocated
Object is being loaded
Object is being started (the constructor
is running)
Object is running
Object is enabled, but cannot run
Object is being stopped (the destructor
is running)
Object has been disabled
Object is disabled and cannot run
Object is being deleted
Object cannot run on the current
system; it will be enabled during the
next boot
Connected to download PID − awaiting
data
Trying to connect