Rear Panel; Figure 2-2 Rear Panel; Table 2-2 Rear Panel Connections - Motorola DCT3412 Installation Manual

2-2 Overview

Rear Panel

The rear panel contains a switched power outlet; connectors for video, audio, and RF cabling;
data output; and modem and data interface connectors. Some connectors are not enabled and
require the support of application software.
Figure 2-2
Rear panel
Table 2-2
Rear panel connections
Key Item Function
1 F-type coaxial cable input
CABLE IN
2 RF video output
RF OUT
3 Mini phono jack enabling the DCT3412 to control a VCR using an optional, low-power IR
IR
Blaster transmitter (not all IPGs support this feature)
4 - S-Video high-quality video output to a VCR or TV that accepts S-Video
S VIDEO
5
RCA type video output to a VCR or TV
VIDEO OUT
6 Y Pb Pr Component video output to an HDTV
7* Ethernet 10/100Base-T port
ETHERNET
8 Coaxial Dolby Digital 5.1 or PCM audio output
SPDIF
9 Optical digital Dolby Digital 5.1 audio or PCM audio output
OPTICAL SPDIF
10 and
AUDIO OUT L
11 HDMI video output to an HDTV (can connect to a DVI input using an HDMI-to-DVI
HDMI
converter cable)
12* USB 2.0 connector for devices such as keyboards, joysticks, scanners, disk storage, PCs,
USB
printers, or digital cameras
13 Connector for optional external hard drive
SATA
14 1394 IEEE 1394 connector for connecting to audio and video devices such as a DTV.
IEEE
15 AC power AC power connector:
* These connectors are not enabled and require the support of the application software
DCT3412 Installation Manual
(left and right) RCA type stereo audio output jacks
R
The bottom plug is an input for the AC power cord
The top plug is a switched power outlet for a device such as a TV or VCR