QMS 2425 Operation Manual page 94

you must configure the printer to use the serial settings specified in
the AUTOEXEC.BAT file.
Press the following control panel keys in the order shown:
Press to...
this
key...
Online Take the printer off line (the
Online indicator goes out.
Menu Access the configuration menu.
Next Advance to the Administration
menu.
Select Access the Administration
menu.
Select Access the Communications
menu.
Next Advance to the Serial menu.
Select Access the Serial menu.
Next Access the Baud Rate menu.
(one or
more
times)
Select Access the Baud Rate menu.
Next Advance to the correct baud
(one or rate.
more
times)
The message
window reads...
IDLE
CONFIGURATION
OPERATOR CONTROL
CONFIGURATION
ADMINISTRATION
CONFIGURATION
COMMUNICATIONS
COMMUNICATIONS
TIMEOUTS
COMMUNICATIONS
SERIAL
SERIAL
MODE
SERIAL
BAUD RATE
BAUD RATE
*9600
BAUD RATE
#