QMS 2425 Operation Manual page 154

The Operator Control page contains the following options. For com-
plete information on any options see chapter 4, "Printer Configura-
tion," of the Reference manual.
Copies
Duplex
Collation
Orientation
Inputbin
Outputbin
Face-Up
Order
Chain
Inputbins
Multipurpose
Size
Allows you to enter the number of copies to print.
Configuration Menu: Operator Control/Copies
Allows you to set duplexing to Off, On, or Tumble.
Configuration Menu: Operator Control/Duplex
Allows you to turn collation Off or On.
Configuration Menu: Operator Control/Collation
Allows you to select Portrait or Landscape
orientation.
Configuration Menu: Operator Control/
Orientation
Allows you to choose Multipurpose, Upper, Lower,
Optional as the input source.
Configuration Menu: Operator Control/Inputbin
Allows you to choose Upper or Face Up as the
output location.
Configuration Menu: Operator Control/Outputbin
This line allows you to select Reverse or Normal
as the face-up order.
Configuration Menu: Operator Control/Face-Up
Order
Allows you to set input bin chaining to Off, On, or
On Any.
Configuration Menu: Operator Control/Chain
Inputbins
Provides a menu to select the size media in the
multipurpose tray.
Configuration Menu: Operator Control/
Multipurpose Size