Face-Up Tray - QMS 2425 Operation Manual

For face-up output, you must attach the face-up tray to the left side of
the printer and configure the printer to access it. This tray holds up to
100 sheets of media.
Use the following instructions to attach the face-up tray.
» Note: When printing transparencies with face-up delivery, remove
them from the face-up tray as soon as delivered to prevent excessive
curling and jams.
1 Insert the left tab on the face-up tray into the slot on the back
of the printer.
2 Press lightly on the right side and insert the right tab into the
slot.
3 Access the Operator Control/Outputbin menu and enable
Face Up.