QMS 2425 Operation Manual page 162

Emulation
Temp
Disk Cache
System Use
Total Memory Shows the size (in KB) of the total amount of RAM
This hotlink provides the status of the hard disk.
Disk(s)
Shows the size (in KB) of the Emulation
Temporary client. This client is used by non-
PostScript emulations for storing downloaded
(soft) fonts, forms, or macros.
Configuration Menu: Administration/Memory/
Manual Config/K Mem Emulation Temp
Shows the size (in KB) of the Disk Cache. This
memory client stores frequently used data in
system memory instead of continually storing and
retrieving it from a hard disk.
Configuration Menu: Administration/Memory/
Manual Config/K Mem /Disk Cache
Shows the size (in KB) of the System Use. Also
known as System Memory, this non-configurable
client is the amount of RAM used to run the
printer's operating system. It's never increased or
decreased. The system memory subtracted from
the total amount of RAM identifies the amount of
RAM available for all the other memory clients.
Configuration Menu: No equivalent
that your printer has.
Configuration Menu: Administration/Memory/
Manual Config/MB Printer Mem
Provides the name, size, and free space on all
attached hard disks.
Configuration Menu: No equivalent