QMS 2425 Operation Manual page 85

This status message...
END JOB
CLOSE ENGINE DOOR(S)
DUPLEXER ABSENT
DUPLEXER JAM
EXTENDED ACCOUNTING
FILE SIZE
FINISHER STAPLE JAM
IDLE
ILLEGAL DUPLEX
PRINTING
ILLEGAL MANUAL FEED
PRINTING
INITIALIZING
means...
The Cancel key has been
pressed.
One or more of the front or
side covers is open and
must be closed.
The optional duplexer unit
is not installed.
Media has jammed while
passing through the
duplexer.
The size of the non-empty
accounting file has been
increased successfully.
The Stackler has a staple
jam.
The printer is on line, but
no jobs are in process.
The optional envelope
feeder was selected as the
input bin and the duplexer
as the output bin. The
printer does not support
duplexing envelopes.
Media has been inserted
in the manual feed slot
before the paper tray lifting
mechanism is in the ready
position.
The printer is getting ready
to go on line.
do this...
Press Select to
provide an end-of-
job indicator for a
print job that does
not have one
Close the front or
side covers.
Locate and clear the
media jam. See
"Media Jams" on
page 6-18.
Use the instructions
in "Media Jams" on
page 6-18 of this
chapter.
Access Operator
Control/Duplex via
the control panel
and set Duplex to
Off.
Remove the media
and reinsert it.