QMS 2425 Operation Manual page 86

This status message...
INPUT IDLE
PRINTING
LOAD STAPLES
PRESS STAPLE TAB
OUTPUTBIN OUTPUTBIN
FULL
OUTPUTBIN OUTPUTBIN
JAM
PRINTING STATUS
means...
The printer is on line and
printing jobs already in the
queue. No new jobs are
arriving at the
communication interfaces.
The stapler is out of
staples.
The specified tray or
output bin is full.
Media has jammed
between the print engine
and the specified output
bin (tray).
A status page is printing
do this...
Use the instructions
in chapter 8,
"Document
Finishing Options"
the "Replacing the
Staple Cartridge"
section of the
Options manual.
Normally this
indicates that you
need to remove the
pages.
Locate and
remove the jam.
See "Media Jams"
on page 6-18.
Wait until after the
status page prints,
and the message
clears.