QMS 2425 Operation Manual page 136

Did the printer run out of memory while downloading Kanji fonts?
If you experience memory problems when downloading Kanji
fonts, then you can do one of the following to increase printer
memory:
Add 4 MB more printer memory.
Decrease the number of fonts that you are downloading. When
downloading a large number of fonts, packet them in smaller
groups for downloading. (For example, instead of downloading
four fonts at one time, download two).
Are you getting the following message:
The Resolution of this PostScript Device Exceeds
the Maximum Resolution Specified in the Licens-
ing Agreement.
It is possible to get this message when attempting to download
Adobe Type Library or Morisawa Type Library Kanji fonts without
first downloading the JFontPrep file.
If you get this message, you must download the JFontPrep file.
Does the start-up page indicate that the QMS Kanji external hard
disk 1 is on line?
When this disk is on line, Japanese fonts print in the lower half of
the start-up page. If not, check that the disk is installed correctly
and that the disk is not damaged.
Does your application support Japanese fonts?
You should be able to select these fonts if the application sup-
ports them.
Did you inadvertently initialize or reformat the internal Kanji IDE
hard disk?
If so, contact your QMS vendor. See appendix A, "QMS Customer
Support," for product sales and service information.