QMS 2425 Operation Manual page 158

Tumble
Duplex
Default
Chaining
Default Paper
Tray
Default
Output Tray
Number of
Paper Trays
Page Stack
Order
Left Margin
Top Margin
Identifies whether duplex print jobs are to print so
they can be bound at the top edge (flip-chart
style).
Configuration Menu: Operator Control/Duplex/
Tumble Duplex
Identifies whether tray chaining is enabled or
disabled. Tray chaining allows the printer to draw
media from another input source with either the
same or any size and type of media (dependent on
the choice selected) automatically when the first
input source empties.
Configuration Menu: Operator Control/Chain
Inputbins
Tells you which input source is the default.
Configuration Menu: Operator Control/Inputbin
Tells you which output tray is the default
Configuration Menu: Operator Control/Outputbin
Tells you the number of input sources available on
your printer.
Configuration Menu: No equivalent.
Tells you the page stack order of the printed
document: Normal or Reverse.
Configuration Menu: Operator Control/Face up
Order
Identifies the amount (in .01" increments) the
image is adjusted horizontally on the page.
Configuration Menu: Administration/Engine/
Image Alignment/Horiz Offset
Identifies the amount (in .01" increments) the
image is adjusted vertically on the page.
Configuration Menu: Administration/Engine/
Image Alignment/Vertical Offset