QMS 2425 Operation Manual page 101

After checking for and removing media from the areas indicated, open
and close one of the printer covers (top, left, or right) to clear the jam
message. If all the jammed media has been removed, printing auto-
matically restarts when the cover is closed. If printing does not restart
or if the printer jams again, make sure that no pieces of media remain
in the printer.
WARNING: The fixing assembly and print delivery areas become
extremely hot when the printer is used. Wait until the printer has
completely cooled down before you touch these areas. Personal
injury could result if you touch these areas while they are hot.
ACHTUNG! Die Fixeriereinheit sowie Teile der Papierausgabe
werden im Betrieb extrem heiá. Warten sie, bis der Drucker
vollständig abgekühlt ist, bevor Sie diese Teile berühren. Ein
Berühren der heiáen Teile kann zu Verletzungen führen
1 Remove any envelopes from the envelope feeder.
2 Push in the extension tray and lower the envelope pressure
plate.