Labels: Special Considerations; Transparencies: Special Considerations - QMS 2425 Operation Manual

Use the following instructions to remove the face-up tray:
1 Remove first the right tab, and then the left tab on the face-
Up tray from the slot on the back of the printer.
» Note: Remember to disable the Operator Control/Outputbin/Face
up setting.
The QMS Stackler Option, which includes three large-capacity output
trays, provides face-up, face-down, job offset, and stapling media
delivery options. See chapter 8, "Document Finishing Options," in the
Options manual for more information.
Use the multipurpose tray to print on envelopes, labels, odd-size
media, and transparencies. The multipurpose tray is also especially
useful if you want to print on a single sheet of letterhead or colored
media without changing the media in the media cassettes. Its capac-
ity is approximately 100 sheets of 20 lbs (75 g/m
When the tray is not in use, retract it into the printer
This section explains how to load print media in the multipurpose tray.
For tips on how to get the best possible printing results, see "Enve-
lopes: Special Considerations," "Labels: Special Considerations," and
"Transparencies: Special Considerations," at the end of this section.
2)
cut-sheet media
.
.