Description; Server Board Features - Intel SE7500CW2 Product Manual

1 Description

Server Board Features

®
The Intel Server Board SE7500CW2 offers a "flat" design, with the processors and memory
subsystems residing on the board. The server board supports dual-processor operation with
®
Intel Xeon processors and the Intel
™
video, network, and IDE and provides basic monitoring hardware and interrupt control for dual
processors and PC/AT
Table 1.

Server Board Features

Feature
Processor
Chipset
Memory
Video
PCI bus
Hard Disk Drive (HDD)
Network
®
E7500 chipset. The board contains embedded devices for
†
-compatible operation.
Description
Dual Intel Xeon processors for the Intel socket 604 that use the Flip Chip Pin Grid
Array (FC-PGA) package
Intel E7500 chipset:
• Supports 400 MHz Front Side Bus (FSB)
• Memory Controller Hub (MCH) (North Bridge)
• I/O Controller Hub 3 (ICH3) (South Bridge)
• P64H2 64-bit I/O hub
• DDR 200/266 compliant ECC DIMMs providing up to 4 GB of memory
• DIMM Sockets: Four 72-bit, 184-pin, gold contact
• Supported DIMM sizes: 128, 256, 512 MB, and 1 GB
• Integrated onboard ATI Rage
• 8 MB SDRAM video memory
• SVGA video port
Five PCI expansion slots for add-in boards:
• One 64-bit, PCI-X 133 MHz expansion slot
• Two 64-bit, PCI-X 100 MHz expansion slots
• Two 32-bit, 33 MHz, PCI expansion slots
Two IDE connectors supporting up to four ATA-100 compatible devices:
• Two ATA 100 connectors controlled by the ICH3
• Two ATA 100 connectors controlled by Promise
Integrated on-board Intel
®
Ethernet controller (Intel
†
XL 64-bit SVGA video controller
†
®
EtherExpress™ PRO100+ 10/100 megabit PCI
82550PM) with two RJ-45 Ethernet ports
20267 ATA RAID controller
continued
7