Primary/Secondary, Master/Slave Submenu - Intel SE7500CW2 Product Manual

Primary/Secondary, Master/Slave Submenus
To access this submenu, select Main on the menu bar at the top of the screen and then the master or
slave to be configured.
Advanced
Main
Primary Master
Primary Slave
Secondary Master
Secondary Slave
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 8 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 8.

Primary/Secondary, Master/Slave Submenu

Feature
Type
Multi-Sector Transfers
LBA Mode Control
32 Bit I/O
Transfer Mode
Ultra DMA Mode
26
Security Power
Choices Description
No options Automatically detects the type of IDE device installed.
No options Specifies the number of sectors that are transferred per
block during multiple sector transfers. This option is
disabled by default.
No options Enables Large Block Addressing (LBA) instead of
cylinder, head, sector addressing. This option is
disabled by default.
• Disabled (default)
Enables 32-bit IDE data transfers.
• Enabled
No options Selects the method of moving data to and from the hard
drive. Automatically set to Standard, which selects the
optimum transfer mode.
• Disabled
Enables Ultra DMA mode.
• Enabled (default)
Boot System
Intel Server Board SE7500CW2 Product Guide
Exit