Opening Socket Lever And Attaching Processor; Applying Thermal Grease - Intel SE7500CW2 Product Manual

Attaching the Processor
✏
NOTE
This server board has "zero-insertion-force" sockets. If the processor does not drop easily into the
socket holes, make sure the lever is in the full upright position and the processor is oriented
properly.
1. Lift the socket lever on the processor.
Figure 24. Opening Socket Lever and Attaching Processor
2. Align the Alignment Triangle Mark (Figure 24, A) on the processor with the Alignment
Triangle Cutout on the socket (Figure 24, B).
3. Insert the processor in the socket and close the socket lever.

Applying Thermal Grease

Apply thermal grease to the processor as shown in Figure 25.
Upgrading
A
B
Figure 25. Applying Thermal Grease
OM14473
OM14472
69