Table 15.
IDE Configuration Submenu (continued)
Primary IDE Master
Primary IDE Slave
Secondary IDE
Master
Secondary IDE Slave No options
Primary/Secondary IDE Master/Slave Submenus
To access these submenus, select Advanced on the menu bar, then IDE Configuration, and then the
master or slave to be configured.
Maintenance
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 16 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 16.
Primary/Secondary IDE Master/Slave Submenus
Feature
Drive Installed
Type
Maximum Capacity
Configuration Software and Utilities
No options
Reports type of connected IDE device. When selected,
displays the Primary IDE Master submenu.
No options
Reports type of connected IDE device. When selected,
displays the Primary IDE Slave submenu.
No options
Reports type of connected IDE device. When selected,
displays the Secondary IDE Master submenu.
Reports type of connected IDE device. When selected,
displays the Secondary IDE Slave submenu.
Advanced
Main
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Diskette Configuration
Event Log Configuration
Options
None
• None
• User
• Auto
• CD-ROM
• ATAPI Removable
• Other ATAPI
• IDE Removable
None
Security
Power
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
Displays the capacity of the drive.
Boot
Exit
continued
51