Primary/Secondary Ide Master/Slave Submenus - Intel S845WD11U Product Manual

Primary/Secondary IDE Master/Slave Submenus

To access these submenus, select Advanced on the menu bar, then IDE Configuration, and then the
master or slave to be configured.
Maintenance
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 23 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 23. Primary/Secondary IDE Master/Slave Submenus
Feature
Drive Installed
Type
Maximum Capacity
Multi-Sector Transfers
(This feature is present
only when Type is not
set to Auto.)
70
Advanced
Main
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Diskette Configuration
Event Log Configuration
Options
No options
• None
• User
• Auto (default)
• CD-ROM
• ATAPI Removable
• Other ATAPI
• IDE Removable
No options
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
Security Power
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
Displays the capacity of the drive.
Specifies number of sectors per block for transfers from
the hard disk drive to memory.
Check the hard disk drive's specifications for optimum
setting.
Intel Server Board S845WD1-E Product Guide
Boot Exit
continued