Wpa (Wi-Fi Protected Access) - D-Link DSL-G604T User Manual

WPA (Wi-Fi Protected Access)

Wi-Fi Protected Access was designed to provide improved data encryption, perceived as weak in WEP, and to
provide user authentication, largely nonexistent in WEP. There are two versions of WPA, both are supported by
the Access Point. WPA includes the option of using a Pre-Shared Key similar to WEP, or a RADIUS server can be
used for varification.
1. Make sure the Enable AP checkbox at the top of the window has been checked.
2. Click to select the WPA radio button.
3. In the Group Key Interval entry field, enter a Time (in seconds) after which the Group Key is changed
automatically.
4. Select either Radius Server or Pre-Shared Key depending on the varification you are using for the
Wireless network.
5. If you are using a Radius Server for authentication, select the Radius Server button and enter the server
IP Address of the RADIUS server, a Port number (or accept the default), and a "Shared" Secret (1-63
characters).
6. If you are using a Pre-Shared Key, type an alphanumeric value of 1-63 characters in length used for
authentication.
7. Click Apply.
Page 32 of 110
DSL-G604T Generation II ADSL2+ Wireless Modem Router
Wireless Settings menu – WPA
www.dlink.com.au