D-Link DSL-G604T Quick Installation Manual

D-Link DSL-G604T Quick Installation Manual

Wireless adsl router
Hide thumbs Also See for DSL-G604T:

Advertisement

Quick Links

This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
Before You Begin
1.
If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service
Provider (ISP).
2.
It's best to use the same computer that is connected to your router for configuring the
DSL-G604T Wireless ADSL Router. The DSL-G604T acts as a DHCP server and will
assign all the necessary IP address information on your network. See at the Quick
Installation Guide or the Manual on the CD-ROM for setting each network adapter to
automatically obtain an IP address.
Check Your Package Contents
If any of the above items is missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DSL-G604T
Wireless ADSL Router
DSL-G604T
shown with antenna and stand
CD-Rom
containing Manual and Warranty
Ethernet Cable
(CAT5 UTP Straight-Through)
ADSL Cable (standard telephone cable)
12V, 1.2A Power
Adapter
DSL-G604T
Wireless ADSL Router
Using a power adapter with
a different voltage rating will
damage and void the
warranty for this product.
1

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DSL-G604T

  • Page 1 If any of the above items is missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DSL-G604T...
  • Page 2: Connecting The Router To Your Computer

    Power LED will turn ON to indicate proper operation. Insert one end of the Ethernet cable into an Ethernet (LAN) port on the back panel of the DSL-G604T and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
  • Page 3: Configure Ip Settings

    To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DSL-G604T Wireless ADSL Router. For Microsoft Windows XP Go to Start >...
  • Page 4 The dialog box displays with a list of currently installed network items. Click Internet Protocol (TCP/IP) Click Properties Make the choice to get IP settings assigned automatically. Select Obtain an IP address automatically Click...
  • Page 5 Connecting Additional Computers To The DSL-G604T Wireless ADSL Router Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet- equipped computers to the LAN ports on the back panel of the DSL- G604T. When you have completed the steps in this Quick Installation Guide,...
  • Page 6: Configuring The Router

    Configuring the Router You can select two methods to configure your new router. The first method is by using D-Link Click’n Connect Utility, which is included on the CD designed to run on Windows XP/2000. Just follow the instructions step by step to configure your router for Internet access for the first time.
  • Page 7 The Home screen appears. Click on the Setup tab to bring up the Setup menu. Click Setup Click the Connection 1 button to go to the configuration menu to make the Internet connection. Click Connection 1...
  • Page 8: Configuring The Wan Connection

    Configuring the WAN Connection Check your ISP information, If you configure for PPPoA type, refer to Manual page 25-27. If you configure for PPPoE type, refer to Manual page 27-28. If you configure for Bridge type, refer to Manual page 29-30. If you configure for DHCP type, refer to Manual page 32-33.
  • Page 9: Configure Connection 1 For Pppoa

    Configure Connection 1 for PPPoA To configure the default connection type (PPPoA) for Connection 1, follow the steps listed below. To change the connection type of Connection 1 to an alternative type follow the instructions according to the desired type as described below in change the connection type. Click the Connection 1 button to view...
  • Page 10 Click Tools when you have applied the new settings. Click System Commands to view the menu used to save changes.
  • Page 11: Configure Connection 1 For Pppoe

    Configure Connection 1 for PPPoE To configure Connection 1 for PPPoE, follow the steps listed below. Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose. Click the Connection 1 button to view...
  • Page 12 Click Tools when you have applied the new settings. Click System Commands to view the menu used to save changes.
  • Page 13: Configure Connection 1 For Bridge

    Configure Connection 1 for Bridge To configure the WAN connection for Bridge, perform the steps listed below. Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose. Click the Connection 1 button to view...
  • Page 14 Click Tools when you have applied the new settings. Click System Commands to view the menu used to save changes.
  • Page 15: Configure Connection 1 For Dhcp For Wan

    Configure Connection 1 for DHCP for WAN To configure the WAN connection for DHCP, perform the steps listed below. Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose. Click the Connection 1 button to view...
  • Page 16 Click Tools when you have applied the new settings. Click System Commands to view the menu used to save changes.
  • Page 17: Configure Connection 1 For Clip

    Configure Connection 1 for CLIP To configure the WAN connection for CLIP, perform the steps listed below. Some of the settings do not need to be changed when you first set up the device but can be changed later if you choose. Click the Connection 1 button to view...
  • Page 18 Click Tools when you have applied the new settings. Click System Commands to view the menu used to save changes.
  • Page 19: Wireless Configuration

    Wireless Configuration Now, click on the Wireless button. This window will appear. Click Enable AP Click None Click Apply For first-time setup, accept the default settings for SSID and Channel, and bypass security by clicking None. These settings may be changed later by following instructions as given in the User’s Guide.
  • Page 20: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.

Table of Contents