D-Link DSL-G604T User Manual page 109

DSL-G604T Generation II ADSL2+ Wireless Modem Router
Three Port Filter
Another style of filter is installed at the same point where the Router connects to the telephone line. Only a
single filter is required. The connection ports are typically labeled as follows:
Line - This port connects to the wall jack.
ADSL – This port connects to the Router.
Phone – This port connects to a telephone or other telephone device.
The diagram below illustrates the proper use of this style of filter. Make certain the lines are properly
connected. If you are unable to hear a dial tone with the telephone, check the connections to make sure they
are securely attached and connected to the correct port.
ADSL Device
3-port Filter
Page 109 of 110 www.dlink.com.au