D-Link DSL-G604T Quick Installation Manual

Hide thumbs

Advertisement

This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.

Before You Begin

1.
If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service
Provider (ISP).
2.
It's best to use the same computer that is connected to your router for configuring the
DSL-G604T Wireless ADSL Router. The DSL-G604T acts as a DHCP server and will
assign all the necessary IP address information on your network. See at the Quick
Installation Guide or the Manual on the CD-ROM for setting each network adapter to
automatically obtain an IP address.

Check Your Package Contents

DSL-G604T
shown with antenna and stand
CD-Rom
containing Manual and Warranty
Ethernet Cable
(CAT5 UTP Straight-Through)
ADSL Cable (standard telephone cable)
12V, 1.2A
Power Adapter
If any of the above items is missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the
property of their respective holders. Software and specifications subject to change without notice.
DSL-G604T Wireless ADSL Router
DSL-G604T
Wireless ADSL Router
Using a power supply with
a different voltage rating
will damage and void the
warranty for this product.
1

Advertisement

loading

  Also See for D-Link DSL-G604T

  Summary of Contents for D-Link DSL-G604T

  • Page 1: Before You Begin

    It’s best to use the same computer that is connected to your router for configuring the DSL-G604T Wireless ADSL Router. The DSL-G604T acts as a DHCP server and will assign all the necessary IP address information on your network. See at the Quick Installation Guide or the Manual on the CD-ROM for setting each network adapter to automatically obtain an IP address.
  • Page 2: Connecting The Router To Your Computer

    Power LED will turn ON to indicate proper operation. Insert one end of the cable into an Ethernet (LAN) port on the back panel of the DSL-G604T and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
  • Page 3: Configure Ip Settings

    To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DSL-G604T Wireless ADSL Router. For Microsoft Windows XP Go to Start >...
  • Page 4 The dialog box displays with a list of currently installed network items. Click Internet Protocol (TCP/IP) Make the choice to get IP settings assigned automatically. Select Obtain an IP address automatically Click...
  • Page 5: Connecting Additional Computers

    Connecting Additional Computers To The DSL-G604T Wireless ADSL Router Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet- equipped computers to the LAN ports on the back panel of the DSL- G604T. When you have completed the steps in this Quick Installation Guide,...
  • Page 6: Web Configuration Utility

    Web Configuration Utility Open your Web browser and type http://192.168.1.1 into the URL address box. Press Enter or Return. The Home/Login page appears. When you first log in, your Login Name is admin; your password is also admin. These may be changed later.
  • Page 7 The Home screen appears. Click on the Setup tab to bring up the Setup menu. Click Setup Click the Connection 1 button to go to the configuration menu to make the Internet connection. Click Connection 1...
  • Page 8: Configuring The Wan Connection

    Configuring the WAN Connection In the Connection 1 window, type the Username and Password used to verify the identity of your ISP account. Click the Apply button when you have entered the information. Enter the Username Password assigned by your ISP. Click Apply Configure Connection 1 for PPPoE...
  • Page 9 To configure Connection 1 for PPPoE, follow the steps listed below. Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose. 1. Click the Connection 1 button under WAN Setup to view the default PPPoA Connection Setup configuration menu.
  • Page 10: Configure Connection 1 For Pppoa

    7. Do not change the PCR or SCR values unless you are required to do so. If you are told to change these, type in the values given to you by your service provider. 8. Type the Username and Password used to verify the identity of your account.
  • Page 11 To configure the default connection type (PPPoA) for Connection 1, follow the steps listed below. To change the connection type of Connection 1 to an alternative type follow the instructions according to the desired type as described below in Change the Connection Type. 1.
  • Page 12: Change The Connection Type

    7. Type the Username and Password used to verify the identity of your account. Typically, the Username is an account number assigned by your ISP and appears in the form account#@serviceprovider.com, while the Password may have been chosen by the account holder. For most users, the remaining settings will not need to be changed.
  • Page 13: Wireless Configuration

    Wireless Configuration Now, click on the Wireless button. This window will appear. Click Enable AP Click None Click Apply For first-time setup, accept the default settings for SSID and Channel, and bypass security by clicking None. These settings may be changed later by following instructions as given in the User’s Guide.