D-Link DSL-G604T User Manual page 25

Using the Setup Wizard - For Static IP Address connections:
1. Select the specific Connection Type from the drop-down menu. The available Static IP Address connection
and encapsulation types are 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP LLC, 1483
Routed IP VC-Mux and IPoA.
2. Change the IP Address, Subnet Mask, ISP Gateway Address, Primary DNS Address, and Secondary
DNS Server IP Address as instructed by your ISP. For IPoA connections it may also be necessary to
change the ARP Server Address. IPoA connection users who have not been given this information should
leave the field blank.
3. If you are instructed to change the VPI or VCI number, type in the correct setting in the available entry
fields. Most users will not need to change these settings. The Internet connection cannot function if these
values are incorrect.
4. Click Next to go to the next window and complete the Setup Wizard.
Page 25 of 110
DSL-G604T Generation II ADSL2+ Wireless Modem Router
www.dlink.com.au