Lan - D-Link DSL-G604T User Manual

DSL-G604T Generation II ADSL2+ Wireless Modem Router

LAN

You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the
default settings together with DHCP service to manage the IP settings for their private network. The IP address
of the Router is the base address used for DHCP. In order to use the Router for DHCP on your LAN, the IP
address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses available
in the DHCP IP address pool will change automatically if you change the IP address of the Router. See the next
section for information on DHCP setup.
To access the Management IP window, click the LAN button in the Home directory.
Management IP window
To change the LAN IP Address or Subnet Mask, type in the desired values and click the Apply button. Your
web browser should automatically be redirected to the new IP address. You will asked to login again to the
Router's web manager.
Page 47 of 110 www.dlink.com.au