D-Link DSL-G604T User Manual page 27

DSL-G604T Generation II ADSL2+ Wireless Modem Router
Using the Setup Wizard - Wireless LAN Configuration
Configure the SSID and Channel for the Wireless LAN. You may also configure WEP security settings at this
time or configure them later using the web manager. Select None to configure WEP later. To disable the
wireless access point, click the Enable AP option box to remove the green check mark. To configure Wirless
LAN settings:
1. Enter the SSID for the Wireless LAN
2. Choose the wireless Channel to be used for your WLAN from the pull down menu.
3. Choose the wireless security setup. If WEP is used an additional step is required for configuration
4. Click Next
Page 27 of 110 www.dlink.com.au