Wi-Fi Protected Setup - D-Link AC750 User Manual

Section 3 - Configuration
Click Wi-Fi Protected Setup on the navigation menu to configure the Wi-Fi Protected Setup
(WPS) feature. Refer to WPS Button on page 122 for more information about WPS. When
you are satisfied with your configuration, click Save Settings.
Enable: Check the box to enable WPS.
WiFi Protected The current status of the WPS feature is displayed here.
Setup:
Lock WPS-PIN Enable or disable WPS-PIN functionality.
Setup:
PIN: The currently defined WPS-PIN is displyaed here.
Reset PIN to Default Click this button to reset the WPS-PIN to the factory default.
Generate New PIN Click this button to generate a new WPS PIN.
Connect your Click this button to launch the WPS Add Device Wizard. Refer to Add
Wireless Device: Wireless Device with WPS on page 47 for more information.
Click the Save Settings button when you are finished.
D-Link DIR-819 User Manual

Wi-Fi Protected Setup

WI-FI PROTECTED SETUP
PIN SETTINGS
ADD WIRELESS STATION
DIR-819
WI-FI PROTECTED SETUP WI-FI PROTECTED SETUP
WI-FI PROTECTED SETUP
Wi-Fi Protected Setup is used to easily add devices to a network using a PIN or button press. Devices must support Wi-Fi Protected
Setup in order to be configured by this method.
If the PIN changes, the new PIN will be used in following Wi-Fi Protected Setup process. Clicking on ''Don't Save Settings'' button will
not reset the PIN.
However, if the new PIN is not saved, it will get lost when the device reboots or loses power.
Save Settings Don't Save Settings
WI-FI PROTECTED SETUP
☑
Enable :
WiFi Protected Setup : Enabled/Configured
☐
Lock WPS-PIN Setup :
PIN SETTINGS
PIN : 49445183
Reset PIN to Default
ADD WIRELESS STATION
Connect your Wireless Device
Save Settings Don't Save Settings
ADVANCED
Generate New Pin
96