Download Print this page

D-Link DSL-G604T Quick Installation Manual

Adsl modem router
Hide thumbs

Advertisement

Quick Links

This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.

Before You Begin

1.
If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service Provider
(ISP).
2.
It is best to use the same computer that is connected to your ISP for configuring the DSL-
G604T ADSL Modem Router. The DSL-G604T acts as a DHCP server and will assign all the
necessary IP address information on your network. See the Appendix for setting each
network adapter to automatically obtain an IP address.

Check Your Package Contents

If any of the above items are missing, please contact your reseller.
©2007 D-Link Australia Pty Ltd. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice.
DSL-G604T Generation II
Wireless ADSL2+ Modem Router
CD-ROM with Click'n Connect Utility and
Product Documentation

Wireless Antenna

Telephone Cable (RJ-11)
CAT 5 UTP Ethernet Cable (RJ-45)
12V 1.25A
Power Adapter
DSL-G604T ADSL Modem Router.
DSL-G604T
ADSL Modem Router
Using a power adapter with
a different voltage rating will
damage and void the
warranty for this product.

Advertisement

loading

  Also See for D-Link DSL-G604T

  Summary of Contents for D-Link DSL-G604T

  • Page 1: Before You Begin

    It is best to use the same computer that is connected to your ISP for configuring the DSL- G604T ADSL Modem Router. The DSL-G604T acts as a DHCP server and will assign all the necessary IP address information on your network. See the Appendix for setting each network adapter to automatically obtain an IP address.
  • Page 2: Connecting The Router To Your Computer

    Computer 1. First, connect the power adapter to the power input at the back panel of the DSL-G604T and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the Power LED will turn ON to indicate proper operation.
  • Page 3: D-Link Click'n Connect Utility

    You can select one of five options: User Manual: This option will open up the DSL-G604T user manual. You will need Adobe Acrobat Reader installed to view the manual. Quick Install Guide: This option will show you a software-based version...
  • Page 4 Step 1 - Power Up the Device Follow the on- screen instructions, then Click Next continue Connect the Power Adapter from the wall socket to the DSL-G604T. Wait for the Status LED to blink before proceeding onto the next step.
  • Page 5 Connect the Ethernet cable from the computer to one of the LAN ports (numbered 1 to 4) on the DSL-G604T now. Wait for the LAN Link LED for the corresponding LAN port number to flash, then click on Next to continue to Step...
  • Page 6 Next continue Connect your ADSL telephone line from the wall socket to the DSL-G604T ADSL socket. Please note that if you are using an ADSL Splitter/Filter, you will need to connect the telephone line from the DSL socket on the filter to the DSL- G604T ADSL socket.
  • Page 7 Follow the on-screen instructions, then proceed to the next step. Step 4 – Checking Device Connectivity The Click’n Connect utility will now check the DSL-G604T to make sure it has been connected correctly. Once it has successfully detected your modem, it will proceed to the next step automatically.
  • Page 8 Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 5 – ISP Configuration Select your Select your...
  • Page 9 Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 6 – Account Configuration Enter your ISP Username...
  • Page 10 Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 7 – Set Wireless Connection Click Next...
  • Page 11 Follow the on-screen instructions, then proceed to the next step. This section is only relevant if you enabled the Wireless Radio on your DSL-G604T Router at Step 7. If you disabled the Wireless Radio, please proceed to page 11.
  • Page 12 The Click’n Connect Utility will now save the settings you have entered to the DSL-G604T modem, and verify that you have entered your account details correctly to ensure an Internet connection can be established. If you receive an error message, please review all the information that you have...
  • Page 13 Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step-by-step. Follow the on-screen instructions, then proceed to the next step. Step 9 – Setup Complete Click Finish close the Click’n...
  • Page 14 Configuring the Router via the Web Interface Now it is time to configure the Router. Enter 10.1.1.1 into the URL address box. Open your Web browser and type http://10.1.1.1 into the URL address box. Press Enter Return. The login dialog appears: When you first log in, your Login Name is admin...
  • Page 15: Web Interface

    Configuring the Router via the Web Interface Once you have logged in, the Home directory tab is prominent with the setup Wizard window displayed. Most users will be able to use the setup wizard to establish the ADSL connection to your ADSL Internet Service Provider (ISP). To begin using the setup wizard, click on the Run Wizard button in the middle of the web page.
  • Page 16 Configuring the Router via the Web Interface The first Setup Wizard window lists a summary of the steps required to complete the setup. Click the Next button to begin setup. Click the Next button.
  • Page 17 Configuring the Router via the Web Interface Configure the time zone used for the Router’s system clock. Select the appropriate time zone setting for your location. Click Next to continue. Select the time zone you are located in. Click the Next button.
  • Page 18 Configuring the Router via the Web Interface Configure the Internet connection type for the WAN interface. Your ISP has given this information to you. If you do not know what type of connection to use, exit the Setup Wizard and contact your ISP for the information. The Setup Wizard window that appears when you click the Next button depends on what connection type you select.
  • Page 19 Configuring the Router via the Web Interface PPPoE / PPPoA Connection If you selected the PPPoE/PPPoA connection type in the previous window, you will see the Setup Wizard window pictured here. Type in the Username and Password used to identify and verify your account to the ISP. If you have been instructed to change the VPI number and VCI number, type in the new values.
  • Page 20 Configuring the Router via the Web Interface Wireless LAN Connection Configure the SSID and Channel for the Wireless LAN. You may also configure either WEP or WPA security settings at this time or configure them later using the web manager. Select None to configure either WEP or WPA later. To disable the wireless access point, click the Enable AP option box to remove the green check mark.
  • Page 21 Configuring the Router via the Web Interface Wireless LAN Connection for WEP If you are configuring WEP security, select the Authentication Type, Cipher rate and Encryption Key. Click Next to continue to the final menu. Uncheck this box if you Enter the SSID name...
  • Page 22 Configuring the Router via the Web Interface Wireless LAN Connection for WPA If you are configuring WPA security, select the type of WPA: WPA, WPA2, or AnyWPA, enter a Group Key Interval in seconds, and enter a PSK String. Click Next to continue to the final menu. Uncheck this box if you Enter the SSID...
  • Page 23 Configuring the Router via the Web Interface Setup Completed All the settings for the connection are now completed. Click the Restart button to save the new settings and restart the Router. The following Restarting window will open to indicate the system is in the middle of rebooting. It will take about two minutes to restart the Router.
  • Page 24 To connect to the network, make sure the network adapter in your computer is configured properly. The following section describes how to configure the network adapter to obtain an IP address automatically for the DSL-G604T ADSL Router. For Microsoft Windows XP Go to Start >...
  • Page 25 The dialog box displays with a list of currently installed network items. Click Internet Protocol (TCP/IP) Click Properties Make the choice to get IP settings assigned automatically. Select Obtain an IP address automatically Click...
  • Page 26: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link Australia 1 Giffnock Avenue, North Ryde, NSW 2113 Sydney, Australia TEL: +61-2-8899-1800 FAX: +61-2-8899-1868 Australia: 1300-766-868 New Zealand: 0800-900-900 URL: www.dlink.com.au www.dlink.co.nz E-MAIL: support@dlink.com.au...