Before You Start; Installation Overview; Setup Wizard; Packing List - D-Link DSL-G604T User Manual

About This User Guide
This user's guide provides instructions on how to install the DSL-G604T ADSL 2+ Router and use it to provide
Internet access for an Ethernet/Wireless network or single computer.
If you are using a computer with a functioning Ethernet port, the quickest and easiest way to set up the DSL-
G604T is to follow the instructions provided in the Quick Installation Guide (QIG).

Before You Start

Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have
all the necessary information and equipment on hand before beginning the installation.

Installation Overview

The procedure to install the Router can be described in general terms in the following steps:
1. Gather information and equipment needed to install the device. Before you begin the actual installation
make sure you have all the necessary information and equipment.
2. Install the hardware, connect the cables to the device, and connect the power adapter.
3. Check the IP settings on your computer and change them if necessary so the computer can access the web-
based software built into the Router.
4. Use the web-based management software to configure the device to suit the requirements of your ADSL
service and requirements of your local network.

Setup Wizard

Many users will be able to configure all the settings necessary to use the DSL-G604T with the Setup Wizard. For
ADSL connections that use PPPoE or PPPoA connections, the simplest way to set up the DSL-G604T is to use
the Setup Wizard to configure the Internet connection. Once you access the web interface used to configure the
device, just launch the Setup Wizard to configure your Internet connection.

Packing List

Open the shipping carton and carefully remove all items. Make sure that you have the items listed here.
•
One DSL-G604T GENERATION II ADSL2+ Ethernet Router
•
One CD-ROM containing the User's Guide, Quick Installation Guide and D-Link Click'n Connect Utility
•
One twisted-pair telephone cable used for ADSL connection
•
One straight-through Ethernet cable
•
One DC power adapter suitable for your electrical service
•
One Quick Installation Guide
Page 4 of 110
DSL-G604T Generation II ADSL2+ Wireless Modem Router
www.dlink.com.au