System; Save Or Load Configuration File; Save Settings And Reboot System; Restore Factory Default Settings - D-Link DSL-G604T User Manual

DSL-G604T Generation II ADSL2+ Wireless Modem Router

System

Once you have configured the Router to your satisfaction, it is a good idea to back up the configuration file to
your computer. To save the current configuration settings to your computer, click the System button in the
Tools directory to display the System Settings window.

Save or Load Configuration File

Click the Save button to Save Settings to Local Hard Drive. You will be prompted to select a location on your
computer to put the file. The file type is .bin (encrypted binary) and may be named anything you wish.
To load a previously saved configuration file, click the Browse button and locate the file on your computer.
Click the Load button to Load Settings from Local Hard Drive. Confirm that you want to load the file when
prompted and the process is completed automatically. The Router will reboot and begin operating with the
configuration settings that have just been loaded.
System Settings window

Save Settings and Reboot System

To save the settings you have configured, click the Save and Reboot button under Save Settings and Reboot
the System.

Restore Factory Default Settings

To reset the Router to its factory default settings, click the Restore button. You will be prompted to confirm
your decision to reset the Router. The Router will reboot with the factory default settings including IP settings
(10.1.1.1) and Administrator password (admin).

Force the Wireless LAN to Restart

To restart the Wireless LAN component, click the Restart AP button. This will allow you to restart the Wireless
LAN component without kicking off any wired users that may be connected at the time.
Page 90 of 110 www.dlink.com.au