Wi-Fi Protected Setup - D-Link DIR-456 User Manual

Section 3 - Configuration
Wi-Fi Protected Setup (WPS) is used to easily add devices to a network using a PIN or button press. Devices must support Wi-Fi Protected
Setup in order to be configured by this method.
If the PIN changes, the new PIN will be used in following Wi-Fi Protected Setup process. Clicking on "Don't Save Settings" will not reset
the PIN. However, if the new PIN is not saved, it will be lost when the device reboots or loses power.

WI-FI PROTECTED SETUP

Select this box to enable the WPS if
Enable:
wireless devices you wish to include in
the local network support Wi-Fi Protected
Setup.
PIN Settings: Only the "Admin" account can change
security settings.
Reset PIN to Resets the PIN to the default number
Default: shown on the device.
Generates a new PIN number for the
Generate New PIN:
device.
Click Connect your Wireless Device
Add Wireless
Station: to add wireless devices to the wireless
network.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
D-Link DIR-456 User Manual
Wi-Fi Protected Setup
42