Getting to Start
Getting to Start
Reading
1、Ensure HR200, cables, and the Host are connected, then turn the unit Power ON
2、Press & hold Trigger.
Illumination LED and Aiming LED cast an Illumination Pattern (red light) and an Aiming Pattern
(blue light);
3、 Keep Aiming Pattern in the center of a bar code. Zoom in and zoom out to allocate the Optimum
Reading Stance.
4、 On a successful reading, there'll be a beep sound, illumination & aiming patterns die out. The
HR200 then transmits barcode message to the Host.
NOTE: Experiences tell a certain range of distances has higher successful reading rate. This range is
the Optimum Reading Stance.
nlscan.com
Page 12