User Suffix; Disable Or Enable User Suffix; Program User Suffix - Newland NLS-HR200 User Manual

Prefix/Suffix Prefix/Suffix
User Suffix
Disable or Enable User Suffix
User suffix is appended to the right of barcode message. For example, if user suffix
is "AB", and the barcode message is "123", The Host receives "123AB".
**Disable User Suffix
【Pro CMD：0306000】
Program User Suffix
Read "Program User Suffix". Then program user suffix byte(s). To end the
suffix, read "Save programming". The user suffix byte is programmed in its
hex values. See example below.
Note: The maximum length for user suffix is 10 bytes.
Program "CODE" as user suffix (The hex of "CODE" are 0x43, 0x4F, 0x44, and
0x45):
1.
2.
3.
4.
5.
6.
appear to the right of a barcode.
nlscan.com
Program User Suffix
【Pro CMD：0301000】
Read "Code Programming ON"
Read "Program User Suffix"
Read "4,3,4,F,4,4,4,5" in order
Read "Save Programming"
Read "Code Programming OFF"
Read "Allow User Suffix" to enable above programming. "CODE" will
Enable User Suffix
【Pro CMD：0306010】
Tools
Code Programming ON
Code Programming OFF
Page 127