Reading Mode - Newland NLS-FM420-MS-30 Integration Manual

Programming the Scanner

Reading Mode

Auto Mode: The ambient luminance change in front of the scanner
»
automatically initiates reading. After completion of reading, the scanner goes to
idle. Both luminance change and the Trigger can initiate reading when idle.
Continuous Mode: Pull the Trigger line low to start reading. The scanner
»
will keep reading. To stop, pull trigger line low again.
**Auto Mode
【Pro CMD：0302010】
nlscan.com
Code Programming ON
Code Programming OFF
Continuous Mode
【Pro CMD：0302020】
Tools
Page 19