Check Digit - Newland NLS-HR200 User Manual

Symbols
MSI-Plessey

Check Digit

Plessey may include Check Digits(s) (not compulsory) following its barcode
message. It may have one or two digits, which verify the barcode message.
"NO Check, Transmit All" means to read without check and transmit all
»
bytes including barcode message and Check Digits.
NO Check, Transmit All
【Pro CMD：0420050】
** Single Check Digit，MOD10
【Pro CMD：0420060】
Double Check Digits，MOD10/MOD10
【Pro CMD：0420070】
When "Check, Do not Transmit Check digit" is enabled and barcode message length
minus one is less than Min Message Length, it will lead to an error.
E.g.：Reading a 4-byte (include check byte) MSI-Plessey with the Min Message Length
being 4 bytes and "Check, Do not transmit Check Digit" enabled leads to an error.
nlscan.com
Double Check Digits，MOD10/MOD11
【Pro CMD：0420080】
NO Transmit Check Digits
【Pro CMD：0420090】
** Transmit Check Digits
【Pro CMD：0420100】
Tools
Code Programming ON
Code Programming OFF
Page 98